What are the Reasons Behind HP Printer Fuser Error?

0 Votes

The HP printer fuser error is because the temperature becomes too hot. Sometimes the fuser hits its maximum temperature that has been allowed. Due to the temperature rise, the fuser toner onto the paper gets damaged or worn out, which can cause disturbances while performing the printing process.  

What are the Types of HP Printer Fuser Errors?

Hp printers face different printer fuser errors, including overheating errors, fuser paper jam errors, fuser hardware errors, and fuser power supply errors. The mistakes can happen due to various problems inside the HP printer components and improper installation of parts and drivers. The errors can also be caused due to improper voltage supply or worn-out fuser components. You can fix the error by troubleshooting the error. You can follow the below-discussed information that may help you fix the fuser error in your HP printer. 

How do I fix the fuser error on my HP printer?

You faced the fuser error on your HP printer with the help of the below-discussed method explained in bullet points for better understanding and application without any expert guidance. 

• Press the power button to turn off the printer. 
• Now you must disconnect the power cord from the printer's rear side. 
• After that, you must wait 30 seconds and reconnect the power cord.
• After that, press the power button to switch on the printer and wait for the product to start. 
• At last, you need to try printing again. 

What causes a printer fuser to go bad?

Printer fuses go bad because of the wear and tear of the mechanical parts and overheating of the parts or components of the printer. The fuser parts got worn out due to regular use for printing the papers. The rollers become worn as well as misaligned from their position. 

Another reason printer fusers are getting wrong is the poor quality of print media that leaves residue or causes jams in the fuser area. Regular maintenance is required to avoid printer fuser errors, and compatible supplies will help prevent uncertain failures. 

How do I reset my HP fuser error?

You can reset your HP fuser error by resetting the printer and waiting for 25 minutes. Go through the below-discussed method and make your printer fuser error-free. 

• You need to press the power button to turn off your preferred printer.
• Now you need to disconnect the power cord from the printer's rear. 
• After that, you can wait for at least 25 Seconds and reconnect the power cord. 
• You can press the power button to turn on the printer and wait for the system to restart. 
• Once your printer has been started, then try to print pages again. 

Can a printer work without a fuser? 

No, a printer cannot work without a fuser because it is one of the critical parts of the printer, and it uses pressure and heat to fuse the toner powder on the page to print the text, pictures, etc. 

If you still found hp printer fuser error, take proper assistance from the customer service team at the toll-free number 1800 425 4999. 

Read Also:- What are the Hp printer's E1, E2, and E3 errors?